Configure Z-NAS Network Setting

Before use the function about "IP Camera ; NAS and Printer Server" , you need to configure the IP address setting correctly.

Following methods let you configure the Z-NAS IP address setting


1) Connect Web Server and configure IP setting ( default http://192.168.123.168/ )






2) Connect the RS232 Cable to Z-NAS, and then Run the Hyper Terminal

Under linux console, edit the "/etc/config/network" file
#vi /etc/config/network

*Edit the "/etc/config/network" file to select “Static”,”Dynamic get IP” or”PPPoe ADSL dialed”and set value

3) In MicroSoft Windows, use "My Network Place" to find Z-NAS, and then edit the "/etc/config/network" file

4) Of course, you also can set the IP with the "ifconfig" command under linux console


Default setting:

When you connect the network cable and power on Z-NAS Board. Fist Z-NAS board will work as Dhcp Client to get a IP address from Dhcp Server ,but If it could not find the Dhcp Server ,the Z-NAS will get its default Static IP "192.168.123.253"

Quick Start for IP Camera , NAS-Network Attached Storage

(A)Use Z-NAS as IP Camera

1. Connect the CCD Camera to Z-NAS Module Board

2. To view the stream with browser ( default IP 192.168.123.168)

3. To view the stream use VLC or Firefox and open the URL:
http://ip:8080/?action=stream

ip: xxx.xxx.xxx.xxx the value depend on Z-NAS ip address

VLC download from http://www.videolan.org/vlc/
Firefox download from http://www.mozilla.com/en-US/

(B) NAS Network Attached Storage – How to use

1. Connect the USB Disk to Z-NAS Module Board

2. To access the USB Storage in Z-NAS under Microsoft Windows .
First, go to "My Network Places" and search "Computer name". Input "Z-NAS" and start to search and you will find the device.

Or Select the"My Network Places" and type the address of "file://E-NAS/"
and press "Enter", then you will find the Storage icon.

Quick start for Printer Server

(1). Connect USB Printer or USB Printer Cable to the Z-NAS usb port


(2). How to use LPR client in Windows XP /Win2000

a.Open Printers and Faxes.

b.Click Create a new port, and then click LPR Port.

c.Click Next and then give the Z-NAS IP(Printer Server) information:

d.Type print queue on that server .Ours is “lp” lowercase letter
And Enable “LPR Byte Counting Enabled”

e.Apply your settings